General Information; Adjusting The Volume - Grundig SC- 660 PLL User Manual

OPERATION

General information

Switching on and off
1
Switch on the device from standby mode with »ON/OFF«.
2
Switch on the device to standby mode with »ON/OFF«.

Adjusting the volume

1
Set the desired volume with »
Setting the brightness of the backlight display
1
Repeatedly press »DIMMER« to change the brightness of the display
(3 levels) or of the backlight.
Note:
In addition to this function, the
ness of the display is adjusted to suit the brightness of the surroundings.
Setting the colour of the display backlight
1
Select the backlight colour (8 colours) by repeatedly pressing »COLOUR«.
Listening with headphones or earphones
1
Insert the headphone or earphone plug (ø 3.5 mm, stereo) into the »
jack on the left of the device.
– The loudspeaker of the device is switched off.
___________________________________________
« (right side of the device).
»AUTO
DIMMER« ensures that the bright-
y
«
ENGLISH 10