Interrupting The Alarm - Grundig SC- 660 PLL User Manual

OPERATION
Alarm with signal tone
1
Press »ON/OFF« to switch the device to standby.
2
Activate the alarm signal as the alarm sound (»e«) by pressing
»ALARM1« or »ALARM2« repeatedly until »e 1« or »e 2« appears
in the display.
– The device wakes you up at the set time with the signal tone (alarm
duration is 90 minutes).

Interrupting the alarm

1
Press »SNOOZE« while the alarm is going off.
– The alarm signal (radio station or signal tone) stops.
– The alarm goes off again at five-minute intervals (overall alarm duration
is 90 minutes).
Cancelling the alarm for the day
1
Press »ON/OFF« while the alarm is going off.
– The alarm (radio station or alarm tone) stops, but it retains the set time for
the next day.
Deactivating and activating alarm standby
1
To deactivate the alarm function press »ALARM1« or »ALARM2«
repeatedly until »
disappear from the display.
– The set alarm time is saved.
2
To activate the alarm function press »ALARM1« or »ALARM2«
repeatedly until »
appear in the display.
___________________________________________
1« or » 2« respectively »e 1« or »e 2«
1« or » 2« respectively »e 1« or »e 2«
ENGLISH 14