Check List - JRC JSS-296 Service Manual

Check items
Antenna installation
General Tuner grounding
Self check
Position update
DC operation
2MHz
4MHz
6MHz
8MHz
Transmission
12MHz
16MHz
18MHz
22MHz
25MHz
TEL mode Communication test
Self test
DSC mode
Communication test
Printer operation
Self test
NBDP mode
Communication test
Printer operation
Frequency selection
W/K receiver
Reception
JSB-196GM
NAH-692/695/698
Software NCT-
version 196N
NDZ-127J
NFC-296/896
96

8. Check list

There is no damage and have a good isolation
against grounding.
The ground plate is welded near the tuner and
cupper plate is not damaged.
Carry out Menu 14.
Check the position in NCT-196N is updated.
Possible to operate only by DC power source.
Check and adjust by menu 41.
Level
Check and adjust by menu 41.
Level
Check and adjust by menu 41.
Level
Check and adjust by menu 41.
Level
Check and adjust by menu 41.
Level
Check and adjust by menu 41.
Level
Check and adjust by menu 41.
Level
Check and adjust by menu 41.
Level
Check and adjust by menu 41.
Level
Communicate with suitable coast station.
Carry out the modem loop test.
Communicate with suitable coast station.
The received DSC file is printed out.
Communicate with suitable coast station.
The communication result is printed out.
Watch frequency can be selected.
Check the received distress messages.
Check by menu 15.
Check by menu 15.
DSC main Check by start up screen of NCT-196N.
DSC sub Check by start up screen of NCT-196N
NBDP main Check by help menu of NDZ-127J.
NBDP sub Check by ROM seal.
Check by help menu of NDZ-127J
Check by menu 15.
Content
Antenna type (Wire / Whip)
Tuner location (Indoor / Outdoor)
Vc Ic
Vc Ic
Vc Ic
Vc Ic
Vc Ic
Vc Ic
Vc Ic
Vc Ic
Vc Ic
Result
Ia
Ia
Ia
Ia
Ia
Ia
Ia
Ia
Ia