Opening / Closing The Printer Cover - JRC JSS-296 Service Manual

3.6.4

Opening / Closing the Printer Cover

When opening the printer cover, move the paper roll stand unit one step back. To open/close the printer
cover, follow the procedures consecutively.
Be sure to turn OFF the printer's power when opening and closing the printer cover.
Failure to comply could result in electrical shock, failure, or injury.
Just after printing, the temperature of the printing head is high. Do not touch the
printing headuntil the temperature goes down.
Failure to comply could result in a burn or injury.
Do not touch any part of the cutter. Doing so is potentially dangerous.
Procedure
1. Loosen the two screws holding the paper roll stand unit fixed.
When closing the printer cover, follow the steps in reverse order.
2. Move the paper roll stand unit one step backwards.
36
CAUTION