User Channel Power Setting - JRC JSS-296 Service Manual

4.7.6.2 User Channel power setting

Procedure
(a) Set the BAND power. (Refer to 4.7.6.1)
(b) Set the Test Tone as ON. (Refer to 4.7.4)
(c) Select the MENU number 35 by the jog dial or
keypad.
MENU Turn the jog dial
or
MENU 3
ENT
(d) Press
Exciter level, Vc and Ic, are displayed on the
LCD.
Vc,Ic: Transistor collector voltage and current (*1)
IA: Antenna current (*2)
(*1) In AC operation, NAH PA transistor's Vc
and Ic are displayed. In DC operation, JSB
PA transistor's Vc and Ic are displayed.
(*2) IA is displayed by pressing
(e) Press PTT of Hand Microphone, in order to
transmit.
(f) Turn the dial and adjust the Exciter level.
(g) Exit the menu.
Register the Exciter level and exit:
Not register and exit:
Back to the preceding menu:
ENT
5 ENT
.
CH
ENT
MENU
CLR
ADJPoWER
RX FREQ
RDY
TX FREQ
ADJPoWER
RX FREQ
RDY
TX FREQ
.
ADJPoWER
Vc 77.9
RX FREQ
TX
RDY
TX FREQ
ADJPoWER
Vc 77.9
RX FREQ
RDY TX
TX FREQ
MENU
35
4,200.0
kHz AGC
4,500.0
kHz
110
Vc 0.0
kHz AGC
Ic 0.0
kHz
110
kHz AGC
Ic 7.5
kHz
103
kHz AGC
Ic 7.0
kHz
73