Jsb-196/Jsb-196Gm Upgrading Procedures (Jd-1301-04) - JRC JSS-296 Service Manual

JSB-196/JSB-196GM Upgrading Procedures (JD-1301-04)

1. Preparation
1.1 Checking of JSB-196/JSB-196GM, NCT-196N, and NDZ-127J software versions.
Check the software versions according to attached document 1 "Checking of JSB-196
/JSB-196GM, JSS-296/596/896 software versions". If software versions are the
following versions, upgrade software according to this procedures.
JSB-196/JSB-196GM：
NCT-196N:
NDZ-127J:
1.2 Item for upgrading
1.2.1 Program files
(1) Download the following file from the Homepage of the MARINE SERVICE
DEPARTMENT.
JSB-196/JSB-196GM, JSS-296/596/896 software: file name "JSS_041105.exe"
(2) Execute the downloaded file ("JSS_041105.exe").
The following files are retrieved.
JSB-196/JSB-196GM: TRX
NAH-692/695/698：
NCT-196N：
NDZ-127J： U28
Updating program
1.2.2 In the case of JSB-196/JSB-196GM
・
JSB-196/JSB-196GM TRX Software Ver3.7
・
Modification Kit (JRC code: 7DEJD0319)
・
Soldering iron ( for replacement of capacitor and chip resistor)
・
Personal computer with RS-232C port (OS: Windows95/98/2000/XP)
・
D-sub cross cable (Connector type: 9pin, female-female)
TRX Ver3.6 or earlier, DSP Ver1.7 or earlier
IC2 Ver2.12 or earlier, IC204 Ver2.11 or earlier,
IC402 Ver2.11 or earlier, IC407 Ver2.10 or earlier
U28 Ver2.10 or earlier
Ver3.7 file name "196_V372.hex"
Ver3.2
IC2 Ver2.12 file name "nct_ic2_V212.hex"
IC204 Ver2.11 file name "nct_ic204_V211.hex"
IC402 Ver2.11 file name "nct_ic402_V211.hex"
IC407 Ver2.10 file name "nct_ic407_V210.hex"
Ver3.01 file name "ndz_u28_V301.bin"
Ver1.00 file name "JSSflash_V100.exe"
file name "196_V372.hex"
D-sub 9pin Female cross cable
1/23
Nov 5, 2004
file name "nah_V320.hex"