Scanning Frequency Settings - JRC JSS-296 Service Manual

4.5.2.2

Scanning Frequency settings

Set the frequency to a maximum of six channels, [1] through [6].
Procedure
8
(a) Press
SETUP
1.Date&time edit
2.Position edit
3.Calling frequency registration
4.Address registration
5.Distress setup
6.Others alarm setup
7.Automatic acknowledgement setup
8.Scanning setup
9.Watchkeeping receiver setup
The "SCANNING FREQUENCY REGISTRATION (TX/RX)" display appears.
SCANNING FREQUENCY REGISTRATION (TX/RX)
[1] 1,610.0 / 1,615.0 kHz
[2] 2,000.0 / 2,000.0 kHz
[3] 3,000.0 / 3,000.0 kHz
[4] 4,208.0 / 4,219.0 kHz
[5] 5,000.0 / 5,000.0 kHz
[6] 6,000.0 / 6,000.0 kHz
Using the number keys, perform the frequency input for each channel in the following
(b)
order, "TX frequency",
Note
To channel the settings for previously set items, press
(c) After input in complete, press
The following display appears.
Tune regist frequency?
ENT
Press
Press
STOP
Channels 201-206 of the JSB-196GM Radiotelephone are allocated for scanning of the
Note
registered frequencies.
from the "SETUP" display and then press
Select no.
ENT
FUNC
[ENT] key ：TUNE
[STOP] key：NO TUNE
to tune the tuner and then return to the "SETUP" screen.
to abort tuning and return to the "SETUP" screen.
ENT
.
, "RX frequency",
ENT
9
and then (SAVE) .
▼
▲
Use and to scroll.
▲
▼
Use and
scroll the screen.
.
and then press
CLR
to
.
ENT
57