Setting Of Jsb-196/Jsb-196Gm User Channel; Simplex Frequency Registration - JRC JSS-296 Service Manual

Setting of JSB-196/JSB-196GM user channel

Register the user channel and Group name, and adjust the channel power as follows.
1. User Channel Registration
The frequencies used frequently can be registered into the user channels (1ch - 200ch).
Procedure
(a) Select the MENU number 7 by the jog dial or
keypad.
MENU
or
MENU
(b) Select channel number by the jog dial or keypad.
Turn the jog dial
or
Input the keypad
(c) Select the emission mode by the jog dial.
Turn the jog dial
In a registered channel, if the mode is
Note
selected for "CLR", elimination of a
channel can be performed.
(d) Input the RX/TX frequency.
・Simplex frequency registration
Input RX frequency and press
(E.g. RX/TX=4100.0 kHz)
4 1 0
・Semi-duplex frequency registration
Input RX frequency and TX frequency each.
(E.g. RX=4200.0 kHz, TX=4500.0 kHz)
4 2 0
4 5 0
(e) Input the channel label.
"_ (Space)" blinks in the LCD.
If the channel label is not required, press the
and complete the registration.
Select an alphabet or number with the jog dial or
keypad, and press
After complete the registration, go to step (b) for further registration or press
the registration mode.
Turn the jog dial
ENT
7 ENT
ENT
ENT
ENT
ENT
0 0 ENT
0 0 ENT
0 0 ENT
or
ENT CLR
USR MEMo
RX FREQ
RDY
TX FREQ
USR-
RX FREQ
RDY
TX FREQ
USR-
RX FREQ
RDY
TX FREQ
USR MEMo
RX FREQ
twice.
RDY
TX FREQ
ENT
USR MEMo
RX FREQ
RDY
TX FREQ
JSB-1_
ENT
RX FREQ
RDY
TX FREQ
to set it.
7/23
Attached documents 2 (2)
Nov 5, 2004
7
26,145.0
kHz AGC
25,070.0
kHz
1
1
- - ,- - - .-
kHz AGC
- - ,- - - .-
kHz
TEL
1
- - ,- - - .-
kHz
- - ,- - - .-
kHz
4,100.0
kHz
- - ,- - - .-
kHz
7
4,200.0
kHz
4,500.0
kHz
7
4,100.0
kHz AGC
4,100.0
kHz
CLR to exit
AGC
7
AGC
AGC