Initial -Setting; Unit Setting Procedure - JRC JSS-296 Service Manual

4.1 Unit setting procedure

NAH-692/695/698
Power Amplifier
NKG-800
Printer
NCT-196N
DSC/NBDP Modem
NDZ-127J
Data Terminal
NCT-196N
DSC/NBDP Modem
JSB-196GM
Radiotelephone
46
4. INITIAL-SETTING
Start
DC power Supply unit
DC source
Battery
Set the charge function to ON
(Refer to 4.2.1)
Adjust the charge voltage
(Refer to 4.2.2)
Set the battery operation
(Refer to 4.2.3)
Setting the Printer character
(Refer to 4.3.1)
Set the Self-ID
(Refer to 4.5.1)
Set the navigation format
(Refer to 4.5.1)
Set the Self-ID
(Refer to 4.6.1)
Set the scanning frequency
(Refer to 4.5.2)
Set the Date and time
(Refer to 4.5.2)
Set the user channel
(Refer to 4.7.2)
Necessary
Tx adjust
Not
necessary
End
Set the Charge Function to OFF
(Refer to 4.2.1)
Adjust Tx power
(Refer to 4.7.6)