Replacing The Roll Paper; Insert The Roll Bar Through The Center Of The Paper Roll - JRC JSS-296 Service Manual

3. Open the printer cover.
3.6.5

Replacing the Roll Paper

When replacing the paper roll, proceed as follows.
Be sure to turn OFF the printer power when opening and closing the printer cover.
Failure to comply could result in electrical shock, failure, or injury.
Just after printing, the temperature of the printer head is high. Do not touch the printer head
until the temperature goes down.
Failure to comply could result in a burn or injury.
Do not touch any part of the cutter. Doing so may result in injury.
Procedure
1.

Insert the roll bar through the center of the paper roll.

If the leading edge of paper is torn or bent, cut it off in a straight line.
CAUTION
37