Checking Of Jsb-196/Jsb-196Gm, Jss-296/596/896 Software Versions - JRC JSS-296 Service Manual

Checking of JSB-196/JSB-196GM, JSS-296/596/896 Software versions

JSB-196/JSB-196GM, NAH-692/695/698, NFC-196/296/896
(1) Press POWER of JSB-196/JSB-196GM.
(2) Press MENU, 1, 5 and ENT to select the VERSION
menu.
(3) TRX (JSB-196/JSB-196GM) software version will be
displayed on the LCD, by turning the dial, e.g. the software
version of DSP (DSP of JSB-196/JSB-196GM), ATU (NFC
-196/296/896 Antenna Tuner), and PA (NAH-692/695/698
Power Amplifier).
NCT-196N
The software versions of DSC MAIN (IC2) and DSC
SUB (IC204) are displayed for several seconds on the
LCD after turning on the POWER switch. The software
version of NBDP MAIN (IC402) can be checked on
NDZ-127J. The software version of NBDP SUB (IC407)
is as follows depending on the versions of NBDP MAIN (IC402).
NBDP MAIN (IC402): Ver2.01 NDBP SUB (IC407): Ver2.00
NBDP MAIN (IC402): Ver2.11 NDBP SUB (IC407): Ver2.10
NDZ-127J
(1) Turn ON the AC switch of NAH-692/695/698 and turn on the POWER switch of NCT-196N.
(2) Set to the TLX mode by pressing the ENT key of the keyboard.
(3) Select the "Help" menu by cursor key and press the ENT key.
(4) Select the "About" in the help menu by cursor and press the ENT key.
(5) The software versions of NDZ-127J (U28) and NCT-196N NBDP MAIN (IC402) will be displayed on
the screen of NZD-127J.
NDZ-127J LCD
JSS-296/596/896 SHIP RADIO STATION
NDZ-127J DTE [Ver 2.11]
Copyright (c) 2002
Japan Radio Co., Ltd.
Last modify: [Sep 29 2003]
NCT-196N MODEM soft Ver 2.11
by
>OK<
4/23
Attached documents 1
JSB-196/JSB-196GM LCD
VERSIoN
26,145.0
RX FREQ
25,070.0
RDY
TX FREQ
VER TRX
4,200.0
RX FREQ
4,500.0
RDY
TX FREQ
NCT-196N LCD
JRC NCT-196N MF/HF DSC TERMINAL
Software version MAIN: 2.12 SUB: 2.11
Navigation: NMEA0183
Transceiver: JSB-196GM
Software version of NBDP MAIN (IC402)
Oct 15, 2004
15
kHz AGC
kHz
3,4
kHz AGC
kHz