Audio Setup Menu - Sony PCS-XG80 Operating Instructions Manual

15fps: Send pictures at a maximum rate of
15 frames per second.
30fps: Send pictures at a maximum rate of
30 frames per second.
60fps: Send pictures at a maximum rate of
60 frames per second.
AUTO: Switch the number of frames
automatically.

Audio Setup Menu

The Audio setup menu is used to set various
audio items.
Audio1
Basic Setup1
Audio Input
Allows you to select the audio input.
MIC: Inputs audio from the microphone.
AUX: Inputs audio from auxiliary external
equipment.
MIC+AUX: Inputs audio from the
microphone and auxiliary external
equipment.
Note
When "Link to Audio Input" is set to "On" in
the Video setup menu, "Audio Input", "Input
Select (MIC)" and "Input Select (AUX)"
cannot be selected.
Input Select (MIC)/
Input Select (AUX)
Allows you to select the microphone and/or
external equipment from which an audio
signal is input.
For the PCS-XG80/XG80S
The options that can be selected vary with
the Audio Input setting.
When you select "MIC" from "Audio
Input", you can select one of the following
four options. When you select "AUX", you
can select "AUDIO 1" or "AUDIO 2".
When you select "MIC+AUX", you can
select two options: one microphone input
from "MIC (A1/A3)", "EC MIC (A7)",
"AUDIO 1" or "AUDIO 2", and one
auxiliary external input from "AUDIO 1" or
"AUDIO 2".
MIC (A1/A3): Select use of the PCS-A1
microphone (supplied with the PCS-
XG80/XG55) or PCSA-A3 microphone
(not supplied) connected to the MIC
(A1/A3) jacks on the Communication
System.
EC-MIC (A7): Select use of the PCSA-A7
echo canceling microphone (not
supplied) connected to the EC-MIC
(A7) jacks on the Communication
System.
AUDIO 1: Select to input the audio of
external equipment connected to the
AUDIO 1 IN jacks on the
Communication System.
AUDIO 2: Select to input the audio of
external equipment connected to the
AUDIO 2 IN jacks on the
Communication System.
Note
The "MIC (A1/A3)" and "EC-MIC (A7)"
settings cannot be used simultaneously.
For the PCS-XG55/XG55S
The options that can be selected vary with
the Audio Input setting.
When you select "MIC" from "Audio
Input", you can select one of the following
two options. When you select "AUX", you
can only select "AUDIO". When you select
"MIC+AUX", you can select "MIC (A1/
A3)", for microphone input, and "AUDIO"
for auxiliary external input.
MIC (A1/A3): Select use of the PCS-A1
microphone (supplied with the PCS-
XG80/XG55) or PCSA-A3 microphone
(not supplied) connected to the MIC
(A1/A3) jacks on the Communication
System.
AUDIO: Select to input the audio of
external equipment connected to the
AUDIO IN jack on the Communication
System.
Note
The PCSA-A7 echo canceling microphone
cannot be used on the PCS-XG55/XG55S.
For the PCS-XA80
The options that can be selected vary with
the Audio Input setting.
Registering Local Information
77