a Lens
10× optical zoom lens.
b POWER/STANDBY indicator
Lights in green when the System is
turned on. When the System is set to
standby mode or is turned off, it lights in
orange.
c TERMINAL connector
Connect to the CAMERA connector on
the System.
d Receiver of the RF Remote
Commander
Point the supplied RF Remote
Commander at this receiver when
pairing with the Camera Unit.
e VISCA OUT connector
Used for VISCA communications.
When a second camera is connected to
the System, connect to the VISCA IN
connector on the second camera.
f Tripod attachment screw hole
Use to attach the camera to a tripod.
For details on the tripod screw, see
"Attaching the PCSA-CXG80 HD
Camera Unit to a Tripod" on page 41.
g Fixing screw holes
Use to fix the camera to a fitting.
h Attachment locations for
hook-and-loop pads
When you use the supplied
hook-and-loop pads, stick them to these
locations.
PCSA-CXA55 HD Camera Unit
(Supplied with PCS-XA80/
XA55)
Front
1
3
Rear
Top
Location and Function of Parts and Controls
2
4
5
6
7
8
9
239