Sony PCS-XG80 Operating Instructions Manual page 237

Sony pcs-xg80; pcs-xg80s; pcs-xg55; pcs-xg55s; pcs-xa80; pcs-xa55 videoconferencing system
Hide thumbs Also See for PCS-XG80:
Table of Contents

Advertisement

j MAINTENANCE connector (D-sub
9-pin)
Used for maintenance service.
Rear
1
2 3
CAMERA
S VIDEO IN
RGB IN
EC-MIC(A7)
MIC(A1/A3)
1(R)
2(L)
1
2
R
L
R
(PLUG IN POWER)
AUDIO 1 IN
AUDIO OUT
8
9
0
qa
qs
a CAMERA connector
Connect to the TERMINAL connector
on the PCSA-CXG80 HD Camera Unit.
b S VIDEO IN connector (mini DIN
7-pin) (PCS-XG80S only)
Connect to the S-video output on the
optional second camera or video
equipment.
c RGB IN connector (D-sub 15-pin)
Connect to the RGB output of the
optional computer or video equipment.
d RGB OUT connector (D-sub
15-pin)
Connect to the RGB input of the
optional projector or display unit.
e HDMI OUT connector
Connect to the HDMI input of the
optional TV monitor.
f ISDN UNIT connector
Connect to the TERMINAL connector
on the optional PCSA-B384S or
PCSA-B768S ISDN Unit.
g AUX CONTROL connector (D-sub
9-pin)
Used for maintenance service.
4
5 6 7
RGB OUT
HDMI OUT
ISDN UNIT
AUX CONTROL
L
R
L
DC 19.5V
REC OUT
1-EXT-2
1
2
qd
qf
qg qh
qj
h
(ground) terminal
I
Connect a ground wire.
i EC-MIC (A7) 1/2 (Echo canceling
microphone) jacks (PCS-XG80S
only)
Connect to optional PCSA-A7 echo
canceling microphones.
j MIC (A1/A3) 1 (R)/2 (L) jacks
(minijack)
Connect to the PCS-A1 microphones
(supplied with PCS-XG80/XG55) or
PCSA-A3 microphones (optional).
Power is supplied to the microphones
from the System.
k AUDIO 1 IN L/R jacks (phono jack)
(PCS-XG80S only)
Connect to the audio outputs of the
optional VCR or audio equipment.
l AUDIO OUT L/R jacks (phono
jack)
Connect to the audio inputs of the TV
monitor.
m REC OUT L/R connectors (phono
jack)
Used when recording the audio signals
to minute a communication. The mixed
sounds of the local and remote parties
are output from these connectors.
n EXT (external equipment) 1/2
connectors (PCS-XG80S only)
Not used with the system of this version.
o
1 (LAN1) connector
(100BASE-TX/10BASE-T, 8-pin
modular)
Used to connect via a LAN or a SIP.
Connect to a hub or a SIP server using
the category 5 cable.
Note
This connector is labeled
PCS-XG55S.
Location and Function of Parts and Controls
(LAN) on the
237

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pcs-xa55Pcs-xg80sPcs-xg55Pcs-xa80Pcs-xg55s

Table of Contents