Sony PCS-XG80 Operating Instructions Manual page 79

Notes
• When "Recording Mute" is set to "On", only
signals from external equipment are affected.
Signals from the microphones or remote sites
are not affected. Therefore, the Recording
Mute functions only when "Audio Input" is
set to "AUX" or "MIC+AUX."
• When connecting an audio recording device
to the AUDIO 1 IN or AUDIO 2 IN and REC
OUT jacks, set "Recording Mute" to "On"
and record the sound only from the audio
recording device. If you want to record the
sound on your site as well, also use the
microphone input.
• The AUDIO 1 IN jack is not available on the
PCS-XG55/XG55S/XA55, and the AUDIO
2 IN jack is labeled AUDIO IN.
Input Mode
Allows you to select the input audio mode.
Stereo: Inputs audio to the R/L jacks of the
audio input as stereo left and right
sounds.
Monaural: Inputs audio to the R/L jacks of
the audio input as monaural sound.
Output Mode
Allows you to select the output audio mode.
Stereo: Outputs audio from the AUDIO
OUT R/L or HDMI OUT jacks as stereo
left and right sounds.
Monaural: Outputs audio from the AUDIO
OUT R/L or HDMI OUT jacks as
monaural sound.
Audio2
Basic Setup2
AUX Local Monitor Out
Allows you to select whether the audio input
from the AUDIO 1 IN or AUDIO 2 IN jacks
outputs to the audio output jacks on the
Communication System.
On: Enables output from the audio output.
Off: Disables output from the audio output.
Note
The AUDIO 1 IN jack is not available on the
PCS-XG55/XG55S/XA55, and the AUDIO 2
IN jack is labeled AUDIO IN.
Reversed MIC Inputs
Allows you to select whether to transmit the
audio input from the microphone with right
and left reversed. If you select "On", you can
match the right and left of the camera image
and audio.
Off: Transmits the audio with right and left
not reversed.
On: Transmits the audio with right and left
reversed.
Audio Input Delay Setting
Allows you to set Audio Input Delay to
synchronize the audio with the video input.
Default –100ms: Selects the default delay
minus 100ms.
Default –50ms: Selects the default delay
minus 50ms.
Default: Selects the default delay.
Default + 50ms: Selects the default delay
plus 50ms.
Default + 100ms: Selects the default delay
plus 100ms.
Custom: Uses the Audio Input Delay you
set.
Audio Input Delay
When you set "Audio Input Delay Setting"
to "Custom", you can set the delay time of
the input audio to match the image and
audio.
Audio Output Delay Setting
Allows you to set Audio Output Delay to
synchronize the audio with the video output.
Default –100ms: Selects the default delay
minus 100ms.
Default –50ms: Selects the default delay
minus 50ms.
Default: Selects the default delay.
Default + 50ms: Selects the default delay
plus 50ms.
Default + 100ms: Selects the default delay
plus 100ms.
Custom: Uses the Audio Output Delay you
set.
Audio Output Delay
When you set "Audio Output Delay Setting"
to "Custom", you can set the delay time of
the output audio to match the image and
audio.
Registering Local Information
79