Sony PCS-XG80 Operating Instructions Manual page 153

3
Adjust the focus using the V, v, B or b button on the Remote Commander.
To focus on a distant subject, press the b button.
To focus on a near subject, press the B button.
To use the BrightFace function
The BrightFace function is provided if the scene is shot by the PCSA-CXG80
HD Camera Unit. When the function is enabled, brightness and contrast are
automatically adjusted and as the result the dark part of a scene is shot brighter
and the bright part is shot clearer. Even when the scene is shot in a dark room
or a backlit room with a window or window shade, human faces are shot
brighter.
To use the BrightFace function, set "BrightFace" to "High", "Medium" or
"Low".
Set "BrightFace" to "Off" when you do not use the BrightFace function.
Notes
• The BrightFace function is not available with cameras other than the PCSA-CXG80.
• The BrightFace function is not available on the PCS-XA80/XA55 system.
To use the Noise Reduction Filter
If you set up Noise Reduction Filter, picture noise can be reduced. You can
select the noise reduction level from among "High", "Medium" and "Low". If
you do not use Noise Reduction Filter, set it to "Off".
Note
This setting is not available on the PCS-XA80/XA55.
Adjusting the Camera
153