Sony PCS-XG80 Operating Instructions Manual page 82

Custom Input Label (RGB)
Selects when "RGB" is selected in "Video
Input".
Custom Input Label (YPbPr)
Selects when "YPbPr" is selected in "Video
Input".
Custom Input Label (S VIDEO)
(PCS-XG80/XG80S/XA80 only)
Selects when "S VIDEO" is selected in
"Video Input".
Video3
Link to Mic
Allows you to select whether to link an
audio input to the selected video input.
Link to Audio Input
Allows you to switch the audio input in
conjunction with switching the video input
by linking each video input and a specific
microphone or other audio input.
Off: Switches the video input and the
microphone or other audio input
separately.
On: Links switching of the video input and
the microphone or other audio input.
Note
When "Link to Audio Input" is set to "On",
"Audio Input", "Input Select (MIC)" and
"Input Select (AUX)" on the Basic Setup1
page of Audio setup menu cannot be selected.
Video Input
Allows you to select the video input.
Camera: Selects the camera picture from
the camera connected to the CAMERA
connector.
S-VIDEO: Selects the picture from the
external equipment connected to the S
VIDEO IN connector.
RGB: Selects the picture from the external
equipment connected to the RGB IN
connector.
YPbPr: Selects the picture from the external
equipment connected to the YPbPr
jacks.
Note
The "S-VIDEO" setting is not available on the
PCS-XG55/XG55S/XA55.
82
Registering Local Information
Audio Input
Allows you to select the audio input which is
linked to the video input selected in "Video
Input" when "Link to Audio Input" is set to
"On".
MIC: Inputs audio from the microphone.
AUX: Inputs audio from the external
equipment.
MIC+AUX: Inputs audio both from the
microphone and external equipment.
Input Select (MIC)
Input Select (AUX)
Allows you to select the audio input from the
microphone and/or external equipment
when "Link to Audio Input" is set to "On".
For the PCS-XG80/XG80S
The options that can be selected vary with
the Audio Input setting.
When you select "MIC" from "Audio
Input", you can select one of the following
four options. When you select "AUX", you
can select "AUDIO 1" or "AUDIO 2".
When you select "MIC+AUX", you can
select two options: one microphone input
from "MIC (A1/A3)", "EC MIC (A7)",
"AUDIO 1" or "AUDIO 2", and one
auxiliary external input from "AUDIO 1" or
"AUDIO 2".
MIC (A1/A3): Select use of the PCS-A1
microphone (supplied with the PCS-
XG80/XG55) or PCSA-A3 microphone
(not supplied) connected to the MIC
(A1/A3) jacks on the Communication
System.
EC-MIC (A7): Select use of the PCSA-A7
echo canceling microphone (not
supplied) connected to the EC-MIC
(A7) jacks on the Communication
System.
AUDIO 1: Select to input the audio of
external equipment connected to the
AUDIO 1 IN jacks on the
Communication System.
AUDIO 2: Select to input the audio of
external equipment connected to the
AUDIO 2 IN jacks on the
Communication System.
Note
The "MIC (A1/A3)" and "EC-MIC (A7)"
settings cannot be used simultaneously.