Table of Contents
Advertisement
Notes
• When configuring multipoint connection
settings, you can only select from G.711 or
G.722.
• When the remote system does not support the
audio mode selected by the local site, the
mode automatically becomes "G.711".
Far End Camera Control
Allows you to select whether to enable the
control of each other's cameras from each
other's site.
On: Enables the control of each other's
cameras. Normally, set to "On".
Off: Disables the control of each other's
cameras.
Screen Size
Allows you to select the screen size of the
picture to be transmitted or received.
You can select from among 720, W4CIF,
W432P, WCIF, 4CIF, CIF, QCIF and
AUTO.
Note
When configuring transmission settings you
can only select from WCIF, 4CIF, CIF, QCIF,
or AUTO.
Video Mode
Allows you to select the compression format
of pictures to be transmitted or received.
You can select from among H.261, H.263+,
H.264 and MPEG4.
Video Frame
Allows you to select the number of video
frames during transmission or reception.
15fps: Send pictures at a maximum rate of
15 frames per second.
30fps: Send pictures at a maximum rate of
30 frames per second.
AUTO: Switch the number of frames
automatically.
Audio Setup Menu
The Audio setup menu is used to set various
audio items.
64
Registering Local Information
Audio1
Basic Setup1
Audio Input
Allows you to select the audio input.
MIC: Inputs audio from the microphone.
AUX: Inputs audio from auxiliary external
equipment.
MIC+AUX: Inputs audio from the
microphone and auxiliary external
equipment.
Note
When "Link to Audio Input" is set to "On" in
the Video setup menu, "Audio Input", "Input
Select (MIC)" and "Input Select (AUX)"
cannot be selected.
Input Select (MIC)/
Input Select (AUX)
Allows you to select the microphone and/or
external equipment from which an audio
signal is input.
The options that can be selected vary with
the Audio Input setting.
When you select "MIC" from "Audio
Input", you can select one of the following
two options. When you select "AUX", you
can only select "AUDIO". When you select
"MIC+AUX", you can select "MIC (A1/
A3)", for microphone input, and "AUDIO"
for auxiliary external input.
MIC (A1/A3): Select use of the PCS-A1
microphone (supplied) or PCSA-A3
microphone (not supplied) connected to
the MIC (A1/A3) jacks on the
Communication System.
AUDIO: Select to input the audio of
external equipment connected to the
AUDIO IN jack on the Communication
System.
Echo Canceller
Allows you to select whether to use the
internal echo canceller.
On: Enables the internal echo canceller.
Off: Disables the internal echo canceller.
Note
When "Audio Input" is set to "AUX", the echo
canceller will not function.
Advertisement
Table of Contents
