Loading Media In Cutter Mode (Option) - Wasp WPL25 User Manual

WPL25/WHC25 User Manual

3.2.4 Loading Media in Cutter Mode (Option)

1. Refer to section 3.2.1 to load the media.
2. Lead the media through the cutter paper opening.
3. Close the top cover gently.
4. Use "Diagnostic Tool" to set the media sensor type and calibrate the selected sensor. (Start
the "Diagnostic tool"  Select the "Printer Configuration" tab  Click the "Calibrate Sensor"
button)
Cutter paper opening
14