Table of Contents
Advertisement
WPL25/WHC25 User Manual
This chapter explains the tools and methods to maintain your printer.
1. Please use one of following material to clean the printer.
Cotton swab
Lint-free cloth
Vacuum / Blower brush
100%
2. The cleaning process is described as following:
Printer Part
Print Head
Platen
Roller
Tear
Bar/Peel
Bar
Sensor
Exterior
Interior
Chapter 6 – Maintenance
(Head cleaner
pen)
ethanol
Method
1. Always turn off the printer before
cleaning the print head.
2. Allow the print head to cool for a
minimum of one minute.
3. Use a cotton swab and 100% ethanol to
clean the print head surface.
1. Turn the power off.
2. Rotate the platen roller and wipe it
thoroughly with 100% ethanol and a
cotton swab, or lint-free cloth.
Use the lint-free cloth with 100% ethanol to
wipe it.
Compressed air or vacuum
Wipe it with water-dampened cloth
Brush or vacuum
Clean the print head when changing
a new label roll
Clean the platen roller when changing
a new label roll
As needed
Monthly
As needed
As needed
35
Interval
Advertisement
Table of Contents
