Chapter 4 - Led And Button Functions; Led Indicator; Regular Button Functions; Power On Utilities - Wasp WPL25 User Manual

WPL25/WHC25 User Manual
Chapter 4 – LED and Button Functions
This printer has one button and one three-color LED indicator. By indicating the LED with different color
and pressing the button, printer can feed labels, pause the printing job, select and calibrate the media
sensor, print printer self-test report, reset printer to defaults (initialization). Please refer to the button
operation below for different functions.

4.1 LED Indicator

4.2 Regular Button Functions

1. Feed labels
When the printer is ready, press the button to feed one label to the beginning of next label.
2. Pause the printing job
When the printer is printing, press the button to pause a printing job. When the printer is paused,
the LED will be green blinking. Press the button again to continue the printing job.

4.3 Power on Utilities

There are six power-on utilities to set up and test printer hardware. These utilities are activated by
pressing FEED button then turning on the printer power simultaneously and release the button at
different color of LED.
Please follow the steps below for different power-on utilities.
1. Turn off the power switch.
2. Hold on the button then turn on the power switch.
LED Color
This illuminates that the power is on and the device is ready to
Green/ Solid
use.
This illuminates that the system is downloading data from PC to
Green/ Flash
memory or the printer is paused.
Amber This illuminates that the system is clearing data from printer.
Red / Solid This illuminates printer head open, cutter error.
This illuminates a printing error, such as head open, paper
Red / Flash
empty, paper jam or memory error etc.
Description
24