System Maintenance Menu (For Maintenance Engineer) - Oki C711 Maintenance Manual

Oki Data CONFIDENTIAL

5.1 System maintenance menu (for maintenance engineer)

While pressing the MENU+ and MENU- keys, turn on the power to enter the maintenance menu.
The menu indications are shown in English only regardless of the destination of the printer.
Note! The system maintenance menu is internally use only, and should not be
disclosed to end user because destination and other parameters can be
modified using this menu.
Table 5-1 Maintenance menu function table
Item Value
Category
(1st Line) (2nd Line)
System Enter ******
Password ******
Mainte-
nance
OKIUSER OKIUSER ODA
OEL
APS
JP1
JPOEM1
OEMA
OEML
Mainte-
nance
Menu
Format SD Execute
Card
44205401TH Rev.1
DF Function
000 Enter the password to enter the system maintenance
000 menu.
Default value is "000000".
A password can be entered in the range of 6- to
12-digit alphanumeric.
For more details, refer to the "Password" sheet.
* Set the destination.
JPOEM1: Japanese OEM
OEMA: Overseas OEM outside Japan of A4 size
default
OEMA: Overseas OEM outside Japan of the
Letter size default
When the printer exits the menu, the printer reboots
automatically.
[Display condition]
Encrypted SD Memory Card function is disabled.
- IInitializes an SD card. Pressing the Enter button for
this option displays the confirmation message:
Are You Sure?
Yes
No
Selecting No restores the last menu view. Selecting
Yes exits the menu, starting formatting an SD card
installed in the printer.
[Display condition]
The printer has an SD Card (Boot Menu-Storage
Setup-Enable SD Card is set to Yes).
* With Boot Menu-Storage Setup-Enable Initialization
set to Yes, the option can be displayed.
Item Value
Category DF
(1st Line) (2nd Line)
Mainte- Format Execute -
nance Flash ROM
Menu
Reset Execute -
EEPROM
Mainte- Mainte- Enable
nance Print nance Print
Disable *
Menu Menu
Fuse Keep Fuse Keep Execute -
Mode Mode
Personality XPS Enable *
Disable
IBM 5577 Enable
Disable *
IBM PPR III Enable *
XL Disable
EPSON FX Enable *
Disable
HP-GL/2 Enable
Disable *
5. Maintenance Menu
Function
Initializes flash ROM. Pressing the Enter button for
this option displays the confirmation message:
Are You Sure?
Yes
No
Selecting No restores the last menu view. Selecting
Yes exits the menu, starting formatting an (on-board)
flash device resident in the printer.
* Never use the option.
Returns the EEPROM contents to the setup by the
manufacturer when shipped from the factory (factory
default profile) value. Upon completion of the setting
change, the system reboots automatically.
* Some specific items are not initialized.
Selects whether or not to display "Print Information"
- "ID Check Pattern" and "Engine Status".
When this menu item is set to "Disable", the function
menu "Print Information" - ID Check Pattern" and
"Engine Status" are not displayed all the time.
When exiting this menu upon completion of setting
change, the printer reboots automatically.
When the ENTER key is pressed, the command is
issued from CU to PU to set the system in ON LINE.
Replace the consumable part with the new part
while the power is turned on. (In this case, fuse
of the new consumable part is not cut, and the
operational counts are reset so that the count value
of old consumable part is not added.)
The check mode is terminated when the power is
turned off. The check mode is disabled when the
power is turned on next time.
Changes the default of Support PDL per brand.
PDL which is "Disable" in this menu is not displayed
at "Print Setup" - "Personality" of Function menu.
INVALID DATA shows up and received data is
abandoned when print data of PDL which is
"Disable" is received.
92 /