Operator Alarm - Oki C711 Maintenance Manual

Oki Data CONFIDENTIAL
If a printer detects an un-recoverable error, the following service call error is displayed on
the LCD.
Service call
nnn: error
Note! nnn indicates an error code.
When a service call is displayed, the error code and the associated error information are
displayed in the lower row of the LCD display at the same time.
Be sure to take note of this error information (numerals indicating address and others)
and inform it to the related departments because the information is used for trouble
analysis and solution. Meaning of error codes and remedial measures are shown in
Tables 7-1-1 and 7-1-2.
Table 7-1-1 Operator alarm
ON
Inspection
Display on operator panel LINE
lamp
Change Paper in %TRAY% Off
%MEDIA_SIZE%
%MEDIA_TYPE%
Press ONLINE Button
Please see HELP for details
44205401TH Rev.1
Contents
lamp
Blink Indicates unmatch between the
media type in the tray and the print
data occurs.
Prompt user to insert paper in the
tray.
Error 661 : Tray1
Error 662 : Tray2
Error 663 : Tray3
Unit of paper size in the Custom
mode follows the unit specified
display unit (menu setting) of the MP
tray unless otherwise specified by
driver.
If unit of paper size is specified by
driver, it is displayed in units specified
by driver.
Paper size in the Custom mode is
indicated as follows:
"<Width> x <Length> <unit>"
ex : 210 x 297 mm
8.5 x 11.0 inch
User is requested to change paper of
the tray and press the ON LINE key.
Display on operator panel
Change Paper in MPTray
%MEDIA_SIZE%
%MEDIA_TYPE%
Press ONLINE Button
Please see HELP for details
Code nnn
Change Paper in %TRAY%
Error
%MEDIA_SIZE%
%MEDIA_TYPE%
Press ONLINE Button
Please see HELP for details
661
662
663
7. Troubleshooting and repair procedure
ON
Inspection
LINE Contents
lamp
lamp
Off Blink Indicates unmatch between the media
type in the tray and the print data
occurs. Prompt user to insert paper in
the tray.
Error 660: MP Tray
Unit of paper size in the Custom
mode follows the unit specified
display unit (menu setting) of the MP
tray unless otherwise specified by
driver. If unit of paper size is specified
by driver, it is displayed in units
specified by driver.
ex: 210 x 297mm
8.5 x 11.0 inch
User is requested to change paper of
the tray and press the ON LINE key.
Off Blink Indicates that the paper size of the
tray or the paper size, and the media
type do not match the print data.
Prompt user to insert paper in the
tray.
Error 461: Tray 1
Error 462: Tray 2
Error 462: Tray 3
Unit of paper size in the Custom
mode follows the unit specified
display unit (menu setting) of the MP
tray unless otherwise specified by
driver. If unit of paper size is specified
by driver, it is displayed in units
specified by driver.
ex: 210 x 297mm
8.5 x 11.0 inch
User is requested to change paper of
the tray and press the ON LINE key.
Code nnn
Error
660
Error
461
462
463
139 /