Printer Boot Menu List - Oki C711 Maintenance Manual

Oki Data CONFIDENTIAL

5.6 Printer boot menu list

While pressing the SET button, turn on the power to display the Boot Menu.
Memo
To display the Boot Menu, entry of password is required. Default value of password
is "aaaaaa".
Category Item Setting value
Enter ************
Password
Parallel Parallel Enable
Setup
Disable
Bi-Direction Enable
Disable
ECP Enable
Disable
Ack Width Narrow
Medium
Wide
Ack/Busy Ack in Busy
Timing
Ack while Busy
I-Prime 3 microseconds
50 microseconds
Disable
Offline Enable
Receive
Disable
USB USB Enable
Setup
Disable
Speed 480Mbps
Enable
Soft Reset Enable
Disable
Offline Enable
Receive
Disable
Serial Enable
Number
Disable
44205401TH Rev.1
Function
Enter password to enter Boot Menu.
Enter the password of 6 to 12 digits of alphanumeric.
The initial value is "aaaaaa".
Setting Valid/Invalid of parallel interface.
Setting Valid/Invalid of bi-direction of parallel
interface.
Setting Valid/Invalid of ECP mode.
Setting the ACK width when receiving the compatible
data.
NARROW = 0.5 μs
MEDIUM = 1.0 μs
WIDE = 3.0 μs
Setting order of outputting the BUSY signal and the
ACK signal when receiving the compatible data.
Setting Valid time/Invalid of the I- PRIME signal
Setting Valid/Invalid of the function that enables to
keep the signal reception possible without changing
I/F signal even when an alarm is issued.
Setting Valid/Invalid of USB interface.
Setting the maximum transfer speed of USB
interface.
Setting Valid/Invalid of Soft Reset.
Setting Valid/Invalid of the function that enables to
keep the signal reception possible without changing
I/F signal even when an alarm is issued.
Setting Valid/Invalid of USB serial number.
Category Item Setting value
Security Job Limitation Off
Setup
Encrypted Job
Make Secure Execute
SD Card
Make Normal Execute
SD Card
Reset Cipher Execute
Key
5. Maintenance Menu
Function
Limits the job to accept. The encrypted
authentication print only is accepted.
It is displayed when the optional internal SD Memory
Card is installed.
Enables encryption functionality for data to store
on an SD card. This option enables encryption key
generation and applies the information for such
encryption (security mode) functionality, initializing
the SD card. The option first displays the message:
Are You Sure?
Yes
No
Selecting No restores the last menu view. Selecting
Yes makes the printer reboot automatically, enabling
the encryption functionality.
[Display condition]
The printer has an SD card, its SD card encryption
functionality is disabled and Storage Setup-Enable
Initialization is set to Yes.
Disables encryption functionality for data to store
on an SD card. This option deletes any encryption
key and does not apply the information for such
encryption (security mode) functionality, initializing
the SD card. The option first displays the message:
Are You Sure?
Yes
No
Selecting No restores the last menu view. Selecting
Yes makes the printer reboot automatically.
[Display condition]
The printer has an SD card, its SD card encryption
functionality is enabled and Storage Setup-Enable
Initialization is set to Yes.
Re-generates the encryption key that is used in the
encrypted SD Memory Card.
It is displayed when the optional internal SD Memory
Card is installed, and the encrypted SD Memory
Card function is made valid.
118 /