SHERCO 2014 250 SEF-R Workshop Manual page 64

Table of Contents

Advertisement

DO NOT TURN OFF THE MOTORCYCLE DURING THE DOWNLOAD
DO NOT TURN OFF THE MOTORCYCLE DURING THE DOWN
DO NOT ABRUPTLY STOP THE FLASH DOWNLOAD PROCESS
DO NOT ABRUPTLY STOP THE FLASH DOWNLOAD PROCESS
DO NOT ABRUPTLY STOP THE FLASH DOWNLOAD PROCESS
THERE IS A RISK OF IRREPAIRABLE DAMAGE TO THE COMPUTER
THERE IS A RISK OF IRREPAIRABLE DAMAGE TO THE COMPUTER
THERE IS A RISK OF IRREPAIRABLE DAMAGE TO THE COMPUTER
5- At the end of the download the fuel pump will start and the following message will appear
At the end of the download the fuel pump will start and the following message will appear
At the end of the download the fuel pump will start and the following message will appear:
Confirm by clicking on this icon
6- Check to make sure that the correct calibration file was allocated by clicking on
Check to make sure that the correct calibration file was allocated by clicking on
Check to make sure that the correct calibration file was allocated by clicking on
"Identification"
Check to make sure that the file name matches the file that was downloaded
Note: Serial number information and operating hours are not reset during a calibration update.
7-Start the motorcycle and make sure that the engine parameters are normal (idle, stepper
Start the motorcycle and make sure that the engine parameters are normal (idle, stepper
Start the motorcycle and make sure that the engine parameters are normal (idle, stepper
opening, etc).
ATTENTION!
(FLASH)
INFORMATION: D
INFORMATION:
file name matches the file that was downloaded
file name matches the file that was downloaded
on and operating hours are not reset during a calibration update.
on and operating hours are not reset during a calibration update.
ownload was successful
LOAD OPERATION
64/75

Advertisement

Table of Contents
loading

This manual is also suitable for:

2014300 sef-r

Table of Contents