SHERCO 2014 250 SEF-R Workshop Manual page 61

The system is not able to detect an ignition coil failure with the engine stopped. The system is not able to detect an ignition coil failure with the engine stopped. The system is not able to detect an ignition coil failure with the engine stopped.
The test results will be the same if the coil is faulty or not. The test results will be the same if the coil is faulty or not. Therefore when testing the ignition
coil make sure that the engine makes the coil make sure that the engine makes the correct sound for a properly functioning ignition coil.
2-Injector
This is the same type of test as with the ignition coil. Make sure that the injector issues a snap This is the same type of test as with the ignition coil. Make sure that the injector issues a snap This is the same type of test as with the ignition coil. Make sure that the injector issues a snap
when activated.
3-Fuel pump/Fan/Stepper
For the fuel pump, the fan and the stepper (air valve) perform a standard test For the fuel pump, the fan and the stepper (air valve) perform a
default it will appear as a classic default. default it will appear as a classic default.
Example of a functioning stepper: Example of a functioning stepper:
Therefore when testing the ignition
a properly functioning ignition coil.
standard test. If there is a
61/75