SHERCO 2014 250 SEF-R Workshop Manual page 27

•
Install the judder spring
ATTENTION ! with the sense of
this part
•
Install the special friction disc. Install the special friction disc.
•
Install all the metal and friction discs. Install all the metal and friction discs.
•
Reinstall the clutch release bearing Reinstall the clutch release bearing
assembly, the clutch spring holder in the assembly, the clutch spring holder in the
reverse order of their removal.
•
Torque the clutch screws to: 10Nm
•
Install the clutch cover dowels, a new Install the clutch cover dowels, a new
clutch cover gasket and tighten to 10Nm. clutch cover gasket and tighten to 10Nm.
with the sense of
screws to: 10Nm
27/75