SHERCO 2014 250 SEF-R Workshop Manual page 42

42/75
Clean of injector body
- Clean the injector body with Net Carbu
- Make sure you clean perfectly the edge of the
mixture throttle on each side by opening it
completely
- Clean the injector
Replace the injector body
- Put back all the parts together again, put some
connector grease inside the electrical connectors
(TPS plug, injector plug)
If you dismount the throttle body manifold, be
careful with the sense of this part!
- Set the throttle cable
ECU connector
-Disconnect the ECU connector
-Inspect it
-Clean with carbu cleaner or universal product
cleaner
-Blow
-Apply connector grease
-Connect to the ECU