2-Software Presentation - SHERCO 2014 250 SEF-R Workshop Manual

2-Software presentation

Note: In order to establish connection In order to establish connection with the bike it must be turned on (ON)
through the various menus only the USB cable with the "MUXDIAG II" box must be connected rious menus only the USB cable with the "MUXDIAG II" box must be connected rious menus only the USB cable with the "MUXDIAG II" box must be connected
to the computer.
Start the software by using this icon. Start the software by using this icon.
Go to the following menu:
Diagnostic Menu
(diagnosis, updates
mapping, etc)
with the bike it must be turned on (ON). To navigate
Setup Menu Setup Menu
(language selection, (language selection,
units, etc) , etc)
Update and sync
Menu (software
update, proxy
settings)
Help Help
50/75