Changing Handset Settings; Change Earpiece Volume; Change Ring Type And Volume - Avaya 3810 Installation And Use Manual

Installation and Use

Changing Handset Settings

This section describes how to:
• Change the earpiece volume
• Change the ring type and volume
• Set Vibrate mode
• Turn the ringer off

Change Earpiece Volume

Press R/VOL on the side of the handset during a call to change the earpiece
volume on the handset.

Change Ring Type and Volume

Press R/VOL on the side of the handset in Standby mode (the handset is out of
the charger unit and not in use) to change the ring type and volume. Repeatedly
press R/VOL until you hear the ring type and volume you want.
The handset has three types of rings and each ring type has a high and low
volume. As you press R/VOL, the ring type and volume selections are audible
and visible in the handset display. The ring type and volume combinations are as
follows:
• Ring Type A (High)
• Ring Type A (Low)
• Ring Type B (High)
• Ring Type B (Low)
• Ring Type C (High)
• Ring Type C (Low)
• Ring Off
4 Using Your Telephone
Changing Handset Settings 41