Install The Base Unit On A Desktop - Avaya 3810 Installation And Use Manual

2 Installing the Telephone

Install the Base Unit on a Desktop

This section provides procedures to install the base unit on a desktop or table.
If you want to mount the base unit on a wall, go to
Standard Wall Plate" on page 14
page 17.
Plug one end of the 14-foot telephone cord into the "Line In" jack on the
1
base unit.
Plug the other end of the telephone cord into the telephone jack that is
2
connected to your communications system.
12 Install the Base Unit on a Desktop
or
Figure 2: Connect Telephone Cord
Line In
jack
"Install the Base Unit on a
"Install the Base Unit Directly on a Wall" on
Telephone jack connected
to communications
system
Installation and Use