Installing the SMART Board
Installing a SMART Board involves the following series of simple
procedures:
•
Attaching the Pen Tray to the whiteboard
•
Finding and marking a suitable location
•
Attaching the wall-mounting bracket to the wall
•
Mounting the whiteboard
•
Connecting the Pen Tray to the computer and power source
•
Installing the SMART Board Software
•
Configuring and orienting the SMART Board
Before You Begin: Unpacking and Checking
Components
Unpack the contents of the shipping container, checking each item
removed against the shipping check list. If any items are missing, contact
SMART Technical Support.
Each SMART Board includes the following components:
• whiteboard
• Pen Tray, including a set of four bullet-tip dry erase markers, four
styluses, and an eraser
• pair of Pen Tray brackets to attach the Pen Tray to the SMART
Board
• pair of brackets to mount the whiteboard on the wall (found on the
back of the whiteboard)
• MOD4, MOD6, and power supply cables
• Windows or Macintosh SMART Board Software (SMART
Notebook and SMART Board driver), located in a plastic
envelope.
SMART Board Installation Guide
If you are setting up a
SMART Board with
projection, "Setting
Up a SMART Board
with Projection" on
page 18 provides
special projector and
Board mounting
instructions.
3