Matching Computer Resolution To Projector Resolution; Installing The Smart Board Software Cd - Smart Technologies SMART Board 3000i Installation Manual

NOTE: The cabinet should be unplugged if the computer and projector will not be used for an
extended period.

Matching Computer Resolution to Projector Resolution

It's very important that computer and projector resolutions match. If they don't match, the on-
screen image may not properly fill the screen.
You must first ensure that the projector is set to its optimal image resolution, which is 1024 x
768 (XGA). While the projector's user manual may indicate that resolutions other than the
optimal one are permitted, you should avoid setting the projector to any other resolution than
1024 x 768. Next, ensure that the computer resolution is also set to 1024 x 768.
IMPORTANT: If the computer resolution is set to anything other than the optimal resolution, you
may not see the entire image, or the image may be too small to fill the screen, even with further
adjustments.
To set your computer resolution to match the projector resolution (in the
Windows operating system)
NOTE: You may need to perform the following procedure using your computer monitor, as
resolution differences can distort the image on the interactive whiteboard screen to the point
where visibility is impaired.
1 Click the Windows Start button and then select Settings > Control Panel.
The Control Panel window appears.
2 Double-click Display.
The Display Properties dialog appears.
3 Click the Settings tab.
4 Under Desktop, adjust the pixel setting on the slider to 1024 x 768.
5 Click the Apply button and then click OK.
6 Restart your computer, if required.
To set your Macintosh computer resolution to match the projector
resolution
1 Click the Apple menu.
2 Click Control Panels.
3 Select Monitors.
The Monitors dialog box appears.
4 Click the Options button. In the Select a monitor setting box, select 1024 x 768, and
then click OK.

Installing the SMART Board Software CD

The installation process should start automatically after you insert the SMART Board
software CD into your CD-ROM drive. Otherwise, install the software as follows.
18
3000i Installation Guide