Connecting The Mod6 Cable To The Pen Tray; Rj11 Connector - Smart Technologies Smart Board Installation Instructions Manual

RJ11 socket on end
of Pen Tray
16

Connecting the MOD6 Cable to the Pen Tray

2. Determine if the vacant COM port on your computer requires a
DB-25 or a DB-9 female connection by counting the pins in the
COM port.
A DB-25 COM port has 25 pins to connect with the 25 holes on a
DB-25 cable; a DB-9 COM port has 9 pins to connect with the 9
holes on a DB-9 cable.
3. Insert the remaining RJ11 connector end of the MOD6 cable into
the appropriate female serial port adaptor (DB-25 or DB-9).
4. Insert the serial port adaptor into the vacant COM port on the
computer.
Step 1: Connect the Pen Tray to the computer
(Macintosh)
1. Insert the RJ11 connector end of the K1074 Macintosh cable into
the open rectangular socket labeled "COMPUTER" on the right
side of the Pen Tray (see figure above).
SMART Board Installation Guide

RJ11 connector

MOD6 serial cable