About This Guide - Smart Technologies Smart Board Installation Instructions Manual

2

About this Guide

A SMART Board can be mounted on a floor stand or on a wall; the
SMART Board 340 can also be mounted on a table stand. The specific
instructions for mounting a SMART Board on a floor stand are described
in the set of instructions provided with the floor stand.
This guide describes all the procedures for mounting a SMART Board on
a wall. It also provides instructions for other important procedures that
apply to both wall-mounted and floor stand-mounted SMART Boards.
These include SMART Pen Tray™ attachment, Pen Tray connection to
the computer and power source, SMART Board Software installation, and
projector set-up and alignment.
This manual is for both Windows
Board. Almost all of the procedures and descriptions in this manual apply
to either system. However, any information that applies solely to
Windows users is accompanied by a window icon in the margin, and
information relating only to Macintosh users is distinguished by a similarly
placed apple icon.
NOTE: Procedures common to both Windows and Macintosh are
described in terms of Windows conventions.
SMART Board Installation Guide
® ®
and Macintosh users of the SMART