Smart Technologies Smart Board Installation Instructions Manual page 31

NOTE: If your Board is accidentally jostled and the projected image
becomes misaligned, you may need to reorient. The quickest way to re-
orient the Board is to click or press twice on the small SMART Board icon
located in the System Tray (at the right side of the task bar).
To orient the SMART Board:
1. Select Orient Board from the Board menu.
or
Press the Orient Board button on the initial SMART Board
screen.
or
Click or press twice on the SMART Board icon in the System
Tray (connected SMART Board only).
or
Press the two Pen Tray buttons simultaneously (holding for at least
one second).
The Pick the Orientation Precision dialog box will appear.
2. Preview the three orientation levels − Quick, Standard and Fine −
by clicking on the circle next to each heading.
Notice that the number of crosses in the miniature Board screen to
the left of these headings increases as you move down the list of
headings.
The three orientation levels are described briefly below.
• The Quick orientation requires only 9 clicks to complete and
is well-suited for fast orientations (e.g., when a Board is
jostled during a presentation).
•
The Standard orientation requires 20 clicks and provides a
level of accuracy suitable for most systems.
•
The Fine orientation involves clicking on 80 individual
crosses. While the Fine setting is the most time-consuming
to complete, it is recommended for higher-resolution systems
that may require a more precise orientation.
3. Once you have determined the orientation level you prefer, select
it by clicking in the appropriate circle.
SMART Board Installation Guide 27