Test Functions And Utilities By Setting Tool; Configuration - Panasonic KR20 User Manual

6.3 Test functions and utilities by setting tool

This chapter is the explanation about test functions and utilities by setting tool.
Refer to Help in setting tool (Configurator KR) for detail.
Reference: <Help in setting tool (Configurator KR)>
How to boot the setting tool software
(1) Connect computer and wireless unit with RS232C cable. (RS485 type: MODE switch No.2 is
set to OFF.)
(2) Turn power supply of master unit on with operating mode switch "SET" or "RUN".
It is possible to use in RUN mode with setting tool, software version 1.20 or later.
(3) Boot setting tool.
Click on the Windows [Start] button and then select "All Programs", "Panasonic-EW Control",
"Configurator", "Configurator KR", and "Configurator KR" on the displayed Windows menu, in
that order.
Below window is displayed.
*From the left, there are 3 areas of "Registration list view", "Routing table view" and "Terminal
equipment list view".

6.3.1 Configuration

It sets the model of wireless unit and the communication settings with computer.
Set the communication condition of computer according to the communication condition of the
wireless unit.
(1) Select "Utility" -> "Configuration" in menu.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
6-7