Table of Contents
Advertisement
･Timing that communication error is output is indicated in below list.
Timing that communication error is output
Communication style
(Time after wireless communication stopped)
1:1topology
30 sec. with no communication
1:1 topology with repeaters
30 sec. with no communication
More than 3 times of polling time with no communication
1:N topology (Polling)
(30 sec. if 3 times of the time is less or equal to 30 sec.)
1:N topology (Event)
No output of communication error
※Polling: Master unit performs wireless communication with slave unit automatically in series.
(Polling time is time that master unit communicate to all slave units)
Event: It performs wireless communication only when upper level of master unit sends
command.
Reference: <9.1 Specifications> Input specification, Output specification, Circuit diagram
2-6
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Advertisement
Table of Contents
Troubleshooting
