Remote Reset; Flow Control Setting - Panasonic KR20 User Manual

6.3.7 Remote reset

Set connected wireless unit in the state of powered on.
This function is used instead of that power supply on again when setting of switches.
(1) Select "Utility" -> "Remote Reset" in menu.
(2) When the below dialog is displayed, click "OK".
Below dialog is displayed during sending reset command.
(3) After resetting correctly, the below dialog is displayed. Click "OK".

6.3.8 Flow control setting

Set flow control available or not available.
(1) Select "Utility" -> "Flow control setting" in menu.
(2) Select flow control "Available", when below dialog is displayed. It is not necessary to set, if flow
control is not necessary.
(Click "cancel" to return the setting before flow control setting.)
After selecting, click "OK".
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
6-17