Register Slave By Setting Tool; Procedures For Slave Registration By Setting Tool; Delete Slave Registration Information By Master - Panasonic KR20 User Manual

4.3 Register slave by setting tool

Slave registration is also possible by setting tool.
Setting way of master and slave are same as slave registration by main unit.
※Instead of pressing <ENTER> switch continuously, slave registration is started by setting tool.
In this chapter, only registration procedures are explained.
For how to use setting tool, refer to Help in setting tool (Configurator KR)
To boot setting tool, click on the Windows ［Start］ button and then select "Programs",
"Panasonic-EW Control", "Configurator", "Configurator KR", and "Configurator KR" on the
displayed Windows menu, in that order.
Reference： <Help in setting tool (Configurator KR)>

4.3.1 Procedures for slave registration by setting tool

Procedures for registration
1) Set switches as same as <4.2.1 Register slave by main unit>
2) Connect computer and wireless unit used as master via RS232C cable.
3) Turn power supply of wireless unit used as master and used as slave on with operating mode
switch "SET".
4) Boot setting tool
5) Execute "Master unit setup","Routing setting", "Transfer to master unit" and "Transfer from main
unit" by setting tool.
6) Execute "Addition of registration list (Addition of slave registration)" by setting tool.
7) LED is blinking as below.
Master
8) Registration is completed when LED lights as below.
Master

4.3.2 Delete slave registration information by master

Procedures for delition
1) Connect computer and master with RS232C cable.
2) Power supply of master on with operating mode switch "SET".
3) Boot setting tool.
4) Execute "Transfer from main unit" and "Delete registration list (Delete slave registration)"
5) Above this, slave registration information is deleted, but slave has the information to be
registered at master. Therefore initialize slave to delete the registration information in slave.
Reference： <5.9 Initialization>
4-8
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Lighting Blinking Extinction
Lighting Lighting Extinction
Slave
Blinking Blinking
Slave
Lighting Lighting