Test And Utilities - Panasonic KR20 User Manual

6.1 Test and utilities

In this chapter, various test functions and utilities are explained.
There are some test functions working only the main unit and some test functions and utilities by
using setting tool.
Before reading this chapter, see the below tables to prepare.
Main unit test functions
Items
Communication test
Field intensity monitor
Test functions and utilities by setting tool
Items
Configuration
Confirmation of COM
port connection
Confirmation of status
(Connected wireless unit)
Confirmation of status
(Slave)
Communication test
Field intensity monitor
Read log
Remote reset
Flow control
*It is possible to use in RUN mode with setting tool, software version 1.20 or later.
Reference: <Help in setting tool (Configurator KR)>
6-2
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Overview
Check communication
of 1:1 topology
Check vacancy of radio
wave
Overview
Select COM port
Test of connection
between computer
and wireless unit
Check version of main
unit
Check wireless unit's
status directly
Check wireless unit's
status by wireless
Check communication
of 1:N topology
Check vacancy of
radio wave for each
channel
Read out error log in
main unit
Reset software of
main unit
Set flow control
available/not available
Required
Master, Slave
Main unit(Any)
Required
Main unit
(Any)
Master,
computer,
Slave
setting tool,
RS232C
cable
Main unit
(Any)
Main unit
(All)
Required setting
Operating mode:
<TEST>
MODE switch:
No.9 <ON/OFF>
Required setting
Operating mode:
<SET> or <RUN>*
COM port:
<RS232C>
Operating mode of
master and slave:
<SET> or <RUN>*
Master COM port:
<RS232C>
Routing setting
Operating mode:
<SET> or <RUN>*
COM port:
<RS232C>
Operating mode:
<SET>
COM port:
<RS232C>