Table of Contents
Advertisement
6.3.6 Read log
You can read out communication error log (record) in wireless unit. Reading out log takes about 1
minute. (In case of baud rate 115200bit/s)
(1) Select "Utility" -> "Read log" in menu.
(2) Below dialog is displayed during data communication.
It takes about 1 minute, wait for a while. (In case of baud rate 115200bit/s)
If communication error happened, errors are listed in log window.
Main unit doesn't have clock function, therefore happenning time is not recorded.
Upper level shows newer error.
Log
"Error codes" of error happened in wireless unit is displayed.
Number in the ( ) shows the unit that error was happened.
Refer to "Error Codes table" in Help for error contents.
Reference: Error codes <Help in setting tool (Configurator KR)>
Initialize Log
All log recorded in wireless unit are initialized. Once initializing, it can not recover.
(It is impossible to initialize the log in RUN mode)
6-16
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Advertisement
Table of Contents
Troubleshooting
