Initial Setting Of Wireless Unit; Setting Of Operating Mode - Panasonic KR20 User Manual

3.2 Initial setting of wireless unit

This is the explanation about the setting of the main unit of wireless unit.
Factory setting is as below figures.

3.2.1 Setting of operating mode

When setting by the main unit, it should be set to "SET".
When transferring setting such as "transfer to main unit" and so on by using setting tool, be sure to
set to "SET".
Other items such as "transfer from main unit", "communication test" are available in RUN mode.
(Available with software version 1.20 or later.)
Usage restriction in RUN mode
Item
File
Registration
list
Utility
*It is not available with software version 1.20 or less.
*Use it in SET mode for "Not available".
Note: When setting, all wireless unit, master and slave, should be set to "SET".
After completing setting, set to "RUN" to start operation.
When using test functions, set to "TEST".
3-4
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
※At factory setting, it's set to "SET"
Transfer to Master Unit
Transfer from Main Unit
Addition (Addition of slave registration)
Delete (Delete slave registration)
Confirmation of COM port connection
Confirmation of status
Communication test
Field intensity monitor
Read log
Initialize Log
Remote reset
Flow control setting
Usage availability
Not available
Available
Not available
Not available
Available
Available
Available
Available
Available
Not available
Available
Not available