Advanced Setting/Mpk Lcd Settings (For Mpk App) - Grandstream Networks GXV3240 Administration Manual

ADVANCED SETTING/MPK LCD SETTINGS (FOR MPK APP)

Key Mode
BLF List
Account
Name
UserID
Display Format
Show DisplayName from
Server
Firmware Version 1.0.3.6
It is used to assign a function to the Multi-Purpose Key in the MPK app
The key mode options are:

Speed Dial
Press to dial the extension configured in UserID field.

Busy Lamp Field (BLF)
Monitor the extension status as configured in UserID field.

Call Transfer
Transfer the current active call to the extension configured in UserID
field.

Call Intercom
Intercom/paging to the extension configured in UserID field.

Speed Dial via Active Account
Similar to Speed Dial but it will dial based on the current active
account. For example, if the phone is offhook and account 2 is
active, it will call the configured extension using account 2.

Dial DTMF
Dial the DTMF digits filled in UserID field during a call.

Call Park
Configure the call park feature code to park or pick up the call.
It is used to display the configured MPK keys. Users could change the
keys order by selecting "Up", "Down", "Check All", or "Delete
It is used to selects the SIP Account assigned with the multi-purpose
keys.
It is used to configure the display name for the multi-purpose key.
It is used to configure the UserID for the corresponding multi-purpose
key mode.
It is used to set the display format for the multi-purpose keys. Users
could select display "Name", "UserID", or "Name (UserID)". "Name" is
the one saved in phone contacts. The default setting is "Name".
It is used to set if the system displays name from server side. The
default setting is "No".
GXV3240 Administration Guide Page 67 of 105