Grandstream Networks GXV3240 Administration Manual page 91

Disable Contact or Message
Full Indicator
Disable Indicator When LCD
is Off
RJ9 Headset TX Gain (dB)
RJ9 Headset RX Gain (dB)
Headset Type
Headset Key Mode
Firmware Version 1.0.3.6
It is used to set if the phone system will turn on the LED indicator at
device's upper right corner when the internal contact storage or
message storage is full. If it set to "Yes", the LED indicator will keep off
if the phone system has new messages. Otherwise, the LED indicator
will be turned on. The default setting is "No".
If set to "Yes", the LED indicator on the upper right corner of the
GXV3240 will not light up when the LCD screen is off. The default
setting is "No".
It is used to set if the phone system will turn on the LED indicator at
device's upper right corner when the LCD screen is turned off. If it set
to "Yes", the LED indicator will keep off when the LCD screen is off.
Otherwise, the LED indicator will be turned on. The default setting is
"No".
It is used to set the Transmission Gain in RJ9 headset channel. It can
be selected from the dropdown list:

0

-6

+6

+12

+18

+24
The default setting is 0dB.
It is used to set the Receive Gain in RJ9 headset channel. It can be
selected from the dropdown list:

0

-6

+6

+12

+18

+24
The default setting is 0dB.
It is used to set which type of head set is connected to the phone
system. It can be selected from the dropdown list:

Normal Headset

Plantronics EHS
If a normal RJ11 headset is connected, it should set to "Normal
Headset". If a Plantronics EHS headset or Jabra EHS headset is used,
it should set to "Plantronics EHS".
When headset is connected to the phone, users could use the
GXV3240 Administration Guide Page 89 of 105