VQ RTCP-XR Interval Report Period
Warning Threshold for Moslq
Critical Threshold for Moslq
Warning Threshold for Delay
Critical Threshold for Delay
Network Settings Page Definitions
Network/Basic Settings
Host name (Option 12)
Vendor Class ID (Option
60)
Network/Advanced Settings
Specifies the HTTP proxy URL for the phone to send packets to. The proxy server will act as an
HTTP Proxy
intermediary to route the packets to the destination.
Specifies the HTTPS proxy URL for the phone to send packets to. The proxy server will act as an
HTTPS Proxy
intermediary to route the packets to the destination.
Bypass Proxy
Enter host names that do not require a proxy to reach. Those names should be separated by commas.
For
Layer 3 QoS
Defines the Layer 3 QoS parameter for SIP. This value is used for IP Precedence, Diff-Serv or MPLS. Default
for SIP
is 26.
Layer 3 QoS
Defines the Layer 3 QoS parameter for RTP. This value is used for IP Precedence, Diff-Serv or MPLS. Default
for RTP
is 46.
Network/OpenVPN® Settings
Configure the interval (in seconds) of phone sending an interval quality report to the
central report collector periodically throughout a call.
Alert Report
Configure the threshold value of listening MOS score (MOS-LQ) multiplied by 10.
The threshold value of MOS-LQ causes the phone to send a warning alert quality
report to the central report collector.
Configure the threshold value of listening MOS score (MOS-LQ) multiplied by 10.
The threshold value of MOS-LQ causes the phone to send a critical alert quality
report to the central report collector.
Configure the threshold value of one way delay (in milliseconds) that causes the
phone to send a warning alert quality report to the central report collector.
Configure the threshold value of one way delay (in milliseconds) that causes the
phone to send a critical alert quality report to the central report collector.
Table 28: Settings/Voice Monitoring
Specifies the name of the client. This field is optional but may be required by Internet Service
Providers.
Used by clients and servers to exchange vendor class ID.
Table 29: Network/Basic Settings
Table 30: Network/Advanced Settings