Account/Sip Settings - Grandstream Networks GXV3240 Administration Manual

ACCOUNT/SIP SETTINGS

SIP Registration
Unregister Before New
Registration
Register Expiration (m)
Wait Time Retry Registration
(s)
Local SIP Port
SUBSCRIBE for MWI
Use Session Timer
Session Expiration (s)
Min-SE (s)
UAC Specify Refresher
Firmware Version 1.0.3.6
It is used to set if allow the phone system to send SIP Register
messages to the proxy/server. The default setting is "Yes".
If it is set to "All", the SIP user's registration information will be cleaned
when the phone start pre-registration after rebooting. The SIP Contact
header will contain "*" to notify the server to unbind the connection. If
set to "Instance", the phone only cleans the current SIP user's info.
The default is "Instance".
It is used to configure the time period (in minutes) in which the phone
refreshes its registration with the specified registrar. The default
setting is 60. The maximum value is 64800 (about 45 days).
It is used to configure the time period (in seconds) in which the phone
will retry the registration process in the event that is failed. The default
setting is 20. The maximum value is 3600 (1 hour).
It is used to configure the local SIP port used to listen and transmit.
The default setting is 5060 for Account 1, 5062 for Account 2, 5064 for
Account 3, 5066 for Account 4, 5068 for Account 5, and 5070 for
Account 6. The valid range is from 5 to 65535.
It is used to set if the phone system will subscribe voice message
service. If it is set to "Yes", the phone system will periodically send
SIP SUBSCRIBE message for Message Waiting Indication service.
GXV3240 phone system
non-synchronized MWI. The default setting is "No".
It is to set if the phone system will use the session timer. If it is set to
"Yes", it will be added in the SIP INVITE message to notify the server.
It is used to configure the phone system's SIP session timer. It
enables
SIP sessions to be periodically "refreshed" via a SIP request
(UPDATE, or re-INVITE). If there is no refresh via an UPDATE or
re-INVITE message, the session will be terminated once the session
interval expires. Session Expiration is the time (in seconds) where the
session is considered timed out, provided no successful session
refresh transaction occurs beforehand. The default setting is 180. The
valid range is from 90 to 64800.
It is used to configure the minimum session expiration timer (in
seconds) if the phone is act as a timer refresher. The default setting is
90. The valid range is from 90 to 64800.
It is use to set which party will refresh the active session if the phone
GXV3240 Administration Guide
supports both synchronized and
Page 45 of 105