Auto-filling Pickup Feature
Code
Pickup Feature Code
Line-seize Timeout
Firmware Version 1.0.3.6
it is set to "Yes", the user could tap the SCA account to barge into an
active session with another shared line. The default setting is "No".
It is used to set if the phone system will add the configured feature
code to retrieve parked calls. If it is set to "Yes", the "Pickup Feature
Code" configured will be automatically prepended on the phone's dial
pad when retrieving the parked call. The default setting is "Yes". This
option will be active only if "Special Mode" is set to "Broadsoft" and
"Enable SCA" is set to "Yes".
It is used to configure the pickup feature code for call park retrieving. If
"Auto-filling Pickup Feature Code" is set to "Yes", the pickup feature
code will be automatically filled in on the phone's dial pad when
retrieving the parked call. This option is used when "Special Mode" is
set to "Broadsoft" and "Enable SCA" is set to "Yes".
It is used to configure the line-size event expiration timer for this
account. If the Shared Call Appearance is active, the phone will send
a SIP SUBSCRIBE request for the line-seize event package if a user
attempts to take the shared line off hook The default value is 15
seconds. The valid range is from 15 to 60.
GXV3240 Administration Guide
Page 49 of 105