Resource Save; Download Target - Lexmark T630 User's Reference Manual

Select a high value if your printer is in constant use. Under most circumstances, this keeps the
printer ready to print with minimum warm-up time. Select a value between 1 and 240 minutes if you
want a balance between energy consumption and a shorter warm-up period.
If the Disabled value is not available from the Power Saver menu item, see
for more information.

Resource Save

Purpose:
To determine what the printer does with downloaded resources, such as fonts and macros stored in
RAM, if the printer receives a job that requires more memory than is available.
Values:
Off* Printer retains downloaded resources only until memory is needed. It then deletes
those resources associated with the inactive printer language.
On Printer retains all downloaded resources for all printer languages during language
changes and printer resets. If the printer runs out of memory,
38 Memory Full

Download Target

Purpose:
To specify the storage location for downloaded resources.
Values:
RAM* All downloaded resources are automatically stored in printer memory (RAM).
Flash All downloaded resources are automatically stored in flash memory.
Disk All downloaded resources are automatically stored on the hard disk.
Storing downloaded resources in flash memory or on a hard disk is permanent storage rather than
the temporary storage that RAM provides. The resources remain in the flash memory or on the hard
disk even when the printer is turned off. Use MarkVision to download resources to the printer.
Print Timeout
Purpose:
To specify the amount of time (in seconds) the printer waits before printing the last page of a print job
that does not end with a command to print the page. The print timeout counter does not start until
Waiting is displayed.
Using the printer menus
is displayed.
237
Disabling Power Saver