Lexmark T630 User's Reference Manual page 266

Message
Disk Corrupted.
Reformat?
Disk Recovery
x/5 yyy%
Enabling Menus
Enter PIN:
=___
Fax <x>
Flushing Buffer
Formatting Disk
DO NOT POWER OFF
Formatting Disk
yyy%
Formatting Flash
DO NOT POWER OFF
Understanding the printer messages
What this message means
The printer has attempted a disk
recovery process and cannot repair
the disk.
The printer is attempting to recover the
hard disk. Disk recovery takes place in
five phases; the second line on the
operator panel display shows the
percent complete of the current phase.
The printer is responding to a request
to make the menus available to all
users.
The printer is waiting for you to enter
your four-digit personal identification
number (PIN).
The printer is processing an incoming
fax.
The printer is flushing corrupted print
data and discarding the current print
job.
The printer is formatting the hard disk.
When formatting takes longer than
usual, the second line of the display
shows the percent complete.
The printer is formatting the flash
memory.
What you can do
• Press Go to reformat the disk
and delete all files currently
stored on the disk.
• Press Stop to clear the message
without reformatting the disk. The
printer may display Disk
Recovery and attempt to recover
the disk.
See also:
Wait for the message to clear.
Do not turn the printer off while this
message is displayed.
Wait for the message to clear, then
press Menu to view the menus from
the operator panel.
See also:
Use the operator panel buttons to
enter the PIN you identified in the
driver when you sent the
confidential job to the printer.
See also:
identification number (PIN)
Wait for the message to clear.
Wait for the message to clear.
Wait for the message to clear.
Warning:
while this message is displayed.
Wait for the message to clear.
Warning:
while this message is displayed.
266
Disk Recovery x/5 yyy%
Enabling menus
Entering a personal
Do not turn the printer off
Do not turn the printer off